ONEZONE for 15m² room, floating floor with diffuser panel.

Tell a Friend

ONEZONE® has been designed so that installation requires no prior experience or any specialist tools and arrives pre-built, complete with everything that you will need to install it; system controls, flexible Fastflo-10™ heating tube and a fully illustrated installation manual. ONEZONE® installations typically require two full working days. However, this is dependent on the specific project and can vary.

Nu-Heat supports all customers by the provision of fully illustrated, award winning, installation manuals and FREE telephone technical support. All Nu-Heat support engineers are experienced underfloor heating experts capable of providing instant help should any unexpected on-site issues arise. No tube layout drawing is provided as installation is so simple.

Please download our installation manual ( PDF format 2.13mb)

Tell a Friend

A ONEZONE system produces a maximum heat output of 70 w/m2 in floating floors. You must ensure this meets the heating requirement of the room and that the boiler has sufficient capacity.

Tell a Friend

For optimum performance hard surfaces such as ceramic tiles, slate, stone and marble are recommended as they provide the best transfer of heat.

Timber floor can be used, provided that the timber is well seasoned or kiln dried (information sheet PDF format, 121kb).

Although carpets resist heat transfer more than other coverings, if simple guidelines are followed, the efficiency of the underfloor heating will not be affected. The combined value of carpet and underlay should not exceed 2.5 tog (information sheet PDF format, 172kb).

Tell a Friend

All UK mainland addresses are eligible for free shipping. Orders placed by 3pm will be delivered within 3 working days.

Special delivery requirements, such as Next Day and Saturday delivery will be charged extra. Please contact Freephone 0800 731 1976, quoting your customer reference to arrange.

Tell a Friend