Introducing fully designed LoPro®Max – the ultimate UFH solution for renovations

LoProMax being installed in a kitchen

Virtually any home can now enjoy the benefits of warm water underfloor heating thanks to LoPro®Max, an innovative new UFH system specifically developed by Nu-Heat for renovation projects.

Older properties, those being extended or renovated, and even those with lowers levels of insulation are now able to upgrade to an efficient, invisible heating system that will help towards keeping energy costs down.

The revolutionary new system features the highest heat output of any retrofit UFH system, easily reaching 120W/m², and offers fast response times equivalent to that of a radiator, all with a low height build-up of just 22mm.

LoPro®Max can be installed in a wide range of projects on both ground and upper floor levels over solid and timber sub-floors.  The system uses a vacuum-formed castellated panel to securely hold the floor heating tube in place before covering in a specialist self-levelling compound, LoPro®QuickSet.  The compound is highly conductive and provides a robust and perfectly level floor surface which can be walked on after just eight hours and is ready for tiling within 72 hours – good news if your project is on a tight schedule.  LoPro®Max is suitable for all floor finishes including tiles, limestone, marble, engineered timber and modern vinyls as well as carpet.

The system integrates seamlessly with any radiator circuit and is the perfect partner for modern gas, oil and LPG condensing boilers as well as heat pumps.

The low running costs of LoPro®Max are a major plus point for any homeowner when compared to an equivalent electric underfloor heating system.  For example, a 30m² electric underfloor system would cost approximately £720 per annum to run.  LoPro®Max  costs just £240 when working with a gas boiler – a huge saving of £480, or 30p per hour!

Nu-Heat creates a bespoke system design for every project as well as supplying everything you need to successfully install a LoPro®Max whole house system, including detailed design drawings, clear and concise manuals and LoPro®Quickset.  Support from the experienced Nu-Heat technical team over the phone is also available if needed.

Key features of LoPro®Max:

  • High heat output – up to 120W/m²
  • Super-fast response time – equivalent to that of a traditional radiator system
  • The easy-to-use self-levelling compound can be walked on after eight hours and provides a perfectly level surface ready for tiling within 72 hours
  • One third of the running cost of an electric UFH system
  • Virtually any floor covering can be applied over LoPro®Max
  • All this with a low height build up of just 22mm

LoPro®Max is also available in OneZone packs, a perfect solution for installing UFH in single areas such as extensions or bathrooms.  OneZones are available in sizes 5m²-60m² and can be ordered online here.

Find out more about LoPro®Max and the entire LoPro® range here or call or call 0800 7311976.

Introducing LoPro®Max OneZone – the ultimate retrofit single zone UFH solution

LoPro<sup srcset=®Max over an existing timber floor” width=”648″ height=”458″ />

Nu-Heat is introducing a new product to the innovative LoPro® range, LoPro®Max OneZone.  LoPro®Max OneZone features a high heat output and fast response times equivalent to that of a radiator system, all with a low height build up of just 22mm.

LoPro®Max OneZone is a warm water underfloor heating system designed for retrofit projects and is ideal for anyone upgrading, replacing or installing heating in one open area.  Extensions and conversions combined are also possible providing that the floors are of a similar level prior to installation.  Due to the impressive heat output, LoPro®Max OneZone is the perfect solution for spaces with large areas of glazing, such as conservatories, and those with minimal insulation where underfloor heating would not usually be a suitable option.

This revolutionary new underfloor heating solution can be installed on ground and upper floor levels over both solid and timber sub-floors.  The system uses a castellated panel design to securely hold the floor heating tube in place before covering in a specialist self-levelling compound, LoPro®QuickSet.  The compound is highly conductive and provides a robust and perfectly level floor surface which can be walked on after three hours and is ready for tiling within just 72 hours.  LoPro®Max OneZone is suitable for all floor finishes including tiles, limestone, marble, engineered timber and modern vinyls as well as carpet.

The system integrates seamlessly with any radiator circuit and is the perfect partner for modern gas, oil and LPG condensing boilers.  Due to the fast response times, the system can be controlled by an existing timeclock, so there is no need to change any present wiring or heating controls.

The low running costs of LoPro®Max OneZone are a major plus point for any homeowner when compared to an equivalent electric underfloor heating system.  For example, a 30m² electric underfloor system would cost approximately £720 per annum to run.  LoPro®Max OneZone costs just £240 when working with a gas boiler – a huge saving of £480, or 30p per hour!

Nu-Heat supplies everything you need to successfully install LoPro®Max OneZone including clear and concise manuals and support from the experienced Nu-Heat technical team over the phone if needed.  The pack sizes range from 4m² up to 60m² and include all controls, the correct amount of Fastflo floor heating tube, the castellated panel fixing system and the fast drying LoPro®QuickSet self-levelling compound.

Key features of LoPro®Max OneZone:

  • High heat output – up to 120W/m²
  • Fast response time – equivalent to that of a traditional radiator system
  • The easy-to-use self-levelling compound can be walked on after three hours (dependant on site conditions) and provides a perfectly level surface ready for tiling within 72 hours
  • One third of the running cost of an electric UFH system
  • Virtually any floor covering can be applied over LoPro®Max OneZone
  • All this with a low height build up of just 22mm

Nu-Heat will be launching LoPro®Max Whole House later this year, offering the same innovative features as LoPro®Max OneZone together with a bespoke system design.

Find out more about LoPro®Max OneZone here or call 0800 731 1976.

EnergyPro™ Solar Thermal – new range, new price, same outstanding quality

 

Nu-Heat has introduced new Solar Thermal panels to their EnergyPro™ range, offering installers the same outstanding quality at a lower price; 30% less than before!

A Solar Thermal system, such as EnergyPro™, uses solar panels to collect heat from the sun.  The energy captured from this process is then used to heat water.  Solar energy is an unlimited resource that produces no harmful emissions and requires no transportation or supply pipelines.

Due to the increasing demand for Solar Thermal systems, Nu-Heat has utilised their buying power to purchase the new EnergyPro™ Solar panels at a great price, passing savings back down to the customer.

Nu-Heat’s EnergyPro™ Solar Thermal range is MCS certified and can be fitted independently or be integrated with an underfloor heating system and/or heat pumps.  The flat plate panels are made by a leading European manufacturer and utilise the latest collector technology to maximise performance.  All components are designed, manufactured and rigorously tested to the highest standard.

Installing a Nu-Heat EnergyPro™ Solar Thermal system is quick and easy with the majority of properties not requiring planning permission to do so.  The new EnergyPro™ panels are also eligible for the Renewable Heat Premium Payment (RHPP) until March 2014 and the Renewable Heat Incentive (RHI) when fitted by an MCS approved installer.

Key features include:

  • Toughened safety glass
  • Roof surface-mounted and integral roof-mounted flat panels available
  • 10 year warranty on parts and labour
  • Eligible for RHPP and RHI
  • MCS and Solar Keymark certification

The financial support available to a homeowner through schemes such as the RHPP and the RHI are great reasons to recommend this technology to your customers.  A well engineered Solar Thermal system can generate up to 60% of a household’s domestic hot water needs on average – a major incentive for any homeowner.

Find out more about Nu-Heat’s EnergyPro™ Solar Thermal range here.