Chat with us, powered by LiveChat
Get a quote
Contact Us 8am - 5pm. Monday to Friday Email us at

Retrofit UFH

Recommended floor coverings for LoPro®

Floor coverings for retrofit underfloor heating

Ceramic tiles, slate & limestone

Tile/stone finishes can be laid on top of a thin de-coupling membrane that in turn sits on top of the LoPro® surface.

The de-coupling layer will prevent micro-cracks or movement propagating through to the tiles/stone and is generally recommended for tiled surfaces whether UFH is present or not. Always use a good quality flexible adhesive and flexible grout.

Engineered hardwoods

Engineered hardwood floors are generally glued, butt-jointed and free-floated over the LoPro® surface.

They can also be glued/bonded directly onto the surface of the LoPro® using a suitable flexible adhesive. Engineered boards do not need to be overly thick because the LoPro® provides extra support therefore Nu-Heat recommends a maximum thickness of 18mm.

Carpet & underlay

For LoPro®10 Nu-Heat recommends that you grout all the pipe runs level with the top surface of the LoPro®10 panel using our optional LoPro® FeatherEdge smoothing compound to provide a smooth flat surface. The grout method will provide a higher heat output and more efficient installation.

With LoPro®Max, the carpet and underlay can be laid directly on the finished surface of the LoPro®QuickSet self-levelling compound. Do not use nails to fix down the gripper rods, always use adhesive.

Linoleum & vinyl

Linoleum and vinyl require a completely flat surface on which to be laid, so the final surface of LoPro®Max is ideal although a thin surface layer of Latexplan Trade can be used if required.

For LoPro®10 Nu-Heat recommends that a 6–10mm layer of Latexplan Trade (available from Nu-Heat) is used over the surface of the LoPro® panels. This method provides a mirror-flat surface for the vinyl floor and compensates for any variation in floor heights between rooms with different coverings.

Floor temperature control

Because some flooring manufacturers recommend a maximum floor surface temperature for their coverings, Nu-Heat can supply a floor temperature sensor for LoPro®10 floors at no cost. This is supplied as standard with LoPro®Max.

More customer feedback »