LoPro®Lite underfloor heating
Our slim retrofit system with a super-quick, dry installation.
Why choose LoPro®Lite?
LoPro®Lite is a slim and versatile retrofit system designed for a quick, dry installation. With no screed or compounds needed, and an impressive light-weight quality, LoPro®Lite makes installation in busy renovation scenarios straightforward.
LoPro®Lite is also a great solution for those concerned about floor-to-ceiling space, adding just 15mm of height before the floor deck is fitted.
In the right scenario, it can even be used alongside our other low profile products, such as LoPro®10 and LoPro®Max, to meet the heating needs of each room and account for a variety floor coverings across one floor level.
Every LoPro®Lite system comes with Nu-Heat’s signature bespoke designs as standard, so you can be sure it will perform as expected.
Dry, super-quick install
Super low-profile, at 15mm
Light-weight
Super-fast response time
Ideal for renovations
Can go over both solid and suspended timber
The heating specialists
Bespoke heating design
Award-winning service
Lifetime tech support
Get a bespoke quote
We would love to speak with you to discuss your project – upload your plans for a free quote.
Installing LoPro®Lite
Because of its completely dry install, fitting LoPro®Lite is easy and quick. Our detailed installation manual, bespoke designs and over-the-phone support, help make this even simpler.
Step 1. Prep the floor by levelling any uneven concrete, insulating below joisted floors and priming the surface ready for the panels.
Step 2. If needed, install an expansion strip around the perimeter of the room, alternatively, you can leave a 10mm expansion gap.
Step 3. Following the layout provided in your installation drawings, lay the pre-routed panels either against the expansion strips or along the 10mm expansion gap. Continue across the floor like this until the space is filled.
Step 4. Install the heat transfer plates into the LoPro®Lite panels, leaving a small gap between plates and stopping short of where the UFH pipe will turn.
Step 5. Finally, following your pipe layout drawings, install the FastFlo tubing.
Not sure LoPro®Lite is the one? We’ll help you find the right system.
Call us on 01404 549770 to speak to a specialist, or use the underfloor heating selector tool to explore more of our products.
LoPro®Lite performance with different floor coverings
The type of flooring chosen can affect underfloor heating performance.
Our LoPro®Lite system is designed to accommodate various floor coverings, but heat output may vary depending on the material.
No matter what the floor covering, we’ll provide a tailored design to optimise your system’s performance in line with your chosen flooring.
| Flow temperature | ||||
| Vinyl | ||||
|---|---|---|---|---|
| Natural stone/tiles | ||||
| 22mm Engineered board (2mm foam underlay)/tiles | ||||
| 2 tog carpet/underlay | ||||
