LoPro^®10 underfloor heating

LoPro^®10 is an award-winning overlay system, designed to allow you to enjoy underfloor heating without dealing with the cost and disruption of digging up your floors. This ultra-slim system adds just 15mm to the existing floor level, making UFH a possibility for many projects, even where floor-to-ceiling space is limited.

Installing LoPro^®10 is simple, as the system is mostly dry and can be laid directly over an existing floor, meaning there’s no need to dig up floors or spend hours waiting for thick screed to dry.

In a well-insulated property, LoPro^®10 can work with both heat pump and boiler systems, giving you the freedom to choose which is right for your project. Part of our bespoke design service includes factoring in the heat source, along with room-by-room heat loss calculations and exact flow rates to ensure your system is perfectly matched to your project.

Being a mostly dry install, LoPro^®10 is simple to fit, especially with the support of our detailed instruction manual and over-the-phone technical expertise.

Step 1. Prep the subfloor by repairing and levelling concrete, insulating below joists and priming areas where castellated panel will be laid, as shown in your design.

Step 2. Lay the LoPro^®10 boards in a brick-bond pattern. To secure them, glue the edges and screw to the subfloor where fitted over suspended timber or floating floors.

Step 3. Lay the castellated panel and fix them in place using the self-adhesive backing.

Step 4 . Finally, lay the pipework in the channels and castellations and pour a small amount of Quickset over the castellated panels. This specially developed formula dries so fast that it can be walked on after 8 hours, with floor coverings added after 72 hours.